厂商 :力辰仪器有限公司
地址 :广东 东莞市主营产品 :胶粘材料试验类 纸品印刷包装试验类 电线电缆塑胶电子测试 玩具纺织测试类 涂装表面测试类 模拟环境试验机类 手机电脑试验类 力学试验机类
联系电话 :13729968997
产品型号: | uv-int 160 | |
一、产品简介: | ||
| ||
仪器适用: 测量UV紫外光强度,能量,温度, 仪器装有软件,具有记忆功能,能联电脑使用。 | ||
二.技术资料 | ||
德国UV-int160 | ||
UV能量计 | ||
型 号:德国UV-int160 | ||
仪器适用: 测量UV紫外光强度,能量,温度, | ||
仪器装有软件,具有记忆功能,能联电脑使用。 | ||
波长范围: UV 250 - 410 nm | ||
输入功率: 0 -- 5,000 mW/ | ||
测量范围: 0-- 2,000 mW/cm2 | ||
显示范围: 0 -- 36,000 mJ/cm2 | ||
能量显示: 2×16位LCD液晶 | ||
测量精度: ± 5 % | ||
测量温度: 0--115°C | ||
取样速度: 0.01 秒(100次/秒) | ||
记录周期: 120秒. | ||
仪器电源: 2 ×3.6 V 长效锂电池 | ||
仪器功耗: 20 uA | ||
电池寿命: 2,000 次 | ||
仪器尺寸: 120×70×13 mm | ||
仪器重量: 200 g | ||
工作极限: 置于110°C 测量环境中≯10秒 | ||
仪器功能: | ||
1.仪器装有UV传感器与微处理器; | ||
2.装有测量记忆软件,能将测量到的光强度、能量、温度值输入到电脑里; | ||
3.具能自动开机,自动关机功能; | ||
4.置于仪器背后的传感器上覆有保护材料 | ||
UV Integrator 160 | ||
+ UV-intensity mW/cm2 | ||
+ UV-dose mJ/cm2 | ||
+ selectable “triggered mode”* | ||
+ LCD display | ||
+ temperature °C/°F | ||
+ SD Memory Card Slot | ||
+ graphic chart on PC | ||
+ re-chargeable accu cells with charger | ||
The UV Integrator 160 is a small, self-contained, high quality UV measuring instrument. It is designed to | ||
measure and display peak UV intensity in mW/cm2, UV dosage in mJ/cm2 and temperature in the UV | ||
curing process. | ||
In the standard version it is equipped with one UV sensor and one temperature sensor for the measuring | ||
of: | ||
Full UV 250 – 410 nm | ||
Temp 32 to 230° F / 0 to 110° C | ||
With this total UV band peak energy and dose measuring, most of the measuring requirements of UV | ||
curing applications can be covered. | ||
Due to its UV sensor and the integrated microprocessor the UV Integrator 160 can measure and display | ||
the peak UV-intensity of the total UV spectrum (mW/cm2). | ||
Additionally, this UV-measuring instrument is calculating the UV-dosage (mJ/cm2) of the UV energy | ||
supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total | ||
Integral of UV-dosage over the full UV spectral bands. | ||
An extra sensor is measuring temperatures from 32 to 230° F / 0 to 115° C. | ||
The sensors are on the back of the unit which also serves as a heat shield. After completion of the | ||
measuring cycle the measuring results can be scrolled through on the built in 2 x 16 digit LCD display. | ||
*This Integrator features a selectable „triggered mode“, i.e. the 60 sec recording cycle starts within a 120 | ||
second readiness phase not before the incident UV-intensity exceeds 2 mW/cm². | ||
This microprocessor integrator is additionally equipped with an SD Memory Card Slot. All measuring data | ||
are stored on an SD-Memory Card and can be downloaded to a computer. The special evaluation | ||
software allows to show, edit and store a history of the measuring results of the entire measuring cycle as | ||
graphic and numeric charts (mW/cm2),(mJ cm2) and (°C/°F). | ||
A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy | ||
saving and extension of the battery service life. | ||
The UV Integrator 160 is available in five different measuring ranges: | ||
(Please state upon order) | ||
Item 48.2.1 UV Integrator 160, Type 1 Diazo 350 – 460 nm + Temp | ||
Item 48.2.2 UV Integrator 160, Type 2 UV-A 315 – 410 nm + Temp | ||
Item 48.2.3 UV Integrator 160, Type 3 UV 250 – 410 nm + Temp | ||
Item 48.2.4 UV Integrator 160, Type 4 UV-B 280 – 315 nm + Temp | ||
Item 48.2.5 UV Integrator 160, Type 5 UV-C 230 – 280 nm + Temp | ||
Item 48.2.6 UV Integrator 160, Type 6 UV-V 395 – 445 nm + Temp |