The TP2614/TP2618 are EMI-hardened, low power ， high-voltage CMOS op-amps featuring THD+N of 0.0002% at 1kHz. This feature along with its low noise and very high PSRR makes TP261x ideal choices for μV-level signal amplification. 

The TP2614/2618 are unity gain stable with 100pF capacitive load with a 1.5MHz bandwidth, 0.8V/μs slew rate, which makes the device appropriate for current-to-voltage converters. 

The TP2614/2618 can operate from a single-supply voltage of +2.7V to +36.0V or a dual-supply voltage of ±1.35V to ±18.0V. Rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. 

The TP2614 is dual channel version available in 8-pin SOIC and MSOP package. The TP2618 is quad channel version available in 14-pin SOIC and TSSOP package.

产品特性:

? Integrated EMI Filter: EMIRR at 1.8GHz 100 dB 

? Wide Supply Range: 2.7 V to 36 V, or Dual-Supply ±1.35 V to ±18 V 

? Bandwidth: 1.5 MHz 

? Slew Rate: 0.8 V/μs 

? Low Supply Current: 125μA per Amplifier 

? Low Input Offset Voltage: 0.5 mV Typical 

? Low VOS TC: 2.0 μV/°C 

? Low Input Bias Current: 0.04 pA Typical 

? Low Noise: 27 nV/√Hz at 1kHz 

? Ultra-low Distortion: 0.0002% at 1 kHz 

? Rail-to-Rail Output Voltage Range 

? Unity Gain Stable for 100pF Capacitive Load 

? Drive 600 Ω Load 

? –40°C to 125°C Operation Range 

? Green, Popular Type Package 

? Transducer Amplifier 

? Smoke Alarms 

? Medical Instrumentation 

? Data Acquisition 

? Audio Equipments 

? Line Drivers or Line Receivers 

? PCM DAC I/V Converter 

? Pre-amplification and Filtering