ETS 5518 環境控制手套箱是為了需要極高可見性、精準度、穩定性的設備及物料而設的，備有一個較大的內部工作區 (13立方英尺，368升)。獨立地維持濕度於 <10 至>98% 相對濕度及氣溫於 0-50°C)。用途包括稱重、檢測、貯藏、生物醫學的製備及老化、醫藥、汽車、電子、DOD、靜電、大學研究和其他應用。

Specifications:
Chamber:
Dimensions: Lighting: 18W sealed fluorescent, ON/OFF sw
Overall: 54”Wx25.25”Dx21.75”H (137x64x55cm) (Light extends 3” down from top of chamber.)
Working space: 38.75”Wx24.5”Dx21”H (98x62x53cm) Gloves: .018” (0.5mm), replaceable hands,
Full clearance: 35.75”Wx20”Dx18”H natural rubber, accordion sleeves standard
Material: 3/8” (6mm) clear & white acrylic Optional: Iris Ports, No Ports
Construction: PS30 polished welded seams Fans: 2x110 cfm (6230 l/min), ON/OFF
Doors: 3/8” (9mm) clear acrylic, ?-turn latches Ports on Right-Hand Side:
Front: 32” x 14” (81 x 35 cm) Access Opening Qty: 2x?” (6mm) Quick Connect (Dehumidification)
Side: 14” x 4” (35 x 10 cm) Access Opening Qty: 1x1” (25.4mm) Hose Barb (Humidification)
Seal: ?” (6mm) Poron, non-setting gasket Qty: 1x1” (25.4mm) Hose Barb (Chamber Vent)
Operating Range: Qty: 1 Brass Quick Connect for Liquid CO2
Humidity: <10 to >98% @ 23°C ambient Port on Left-Hand Side:
Temp: 32 to >122°F (0-50°C) @ 23°C ambient 1x1.5” (31.4mm) Cable pass through
Controllers: Power:
Two (2) CAL 3300, single ramp/soak cycles Voltage: 115/230VAC, 50/60Hz
One (1) CAL 3300, optional 3rd parameter Current: 8 Amps/4 Amps
Resolution: 0.1%/0.1° Shipping: Chamber: 63”x36”x33” 150-lbs.
Rec. Out: Humidity: 0-1VDC (0 to 100% RH) Accessories: 22”x22”x14” 27-lbs.
Temperature: 0-1VDC (-40 to 60°C) Operating Systems:
Optional Computer Interface: Dehumidify: Desiccant/Pump
MODBUS pro. via RS485-PC (Serial or USB) 1-lb (0.45kg) CaSO4/0.6cfm
with W98, XP, W7Pro (No function with W7 Home) Humidify: Single Head Ultrasonic
Sensor: (Extends 3” into chamber on right side wall) Capacity: 0.9 gal (3.4 l)
Type: Temperature compensated RH/Temp Heat: Electric, 500W
RH: Capacitive film, 0 to 100%, non-condensing (Mounted internally on rear wall of chamber.)
Temp: RTD, -40 to +140°F (-40 to 60°C) Cool: Liquid CO2 to gas (u