产品名称：森客SENKE纳米光触媒甲 醛清 除剂 净含量：280ML 成分：去离子水，甲 

醛捕捉剂，光触媒，植物精油等 储存条件：常温避光储存 使用方法： 将喷涂表面清洁干燥，屏 蔽遮挡无需喷涂的部位，根据空间大小适当调整产品用量，喷涂前后保持通风环境。 使用前轻摇罐体，喷嘴与被喷涂物保持垂直约25厘米距离，均匀喷涂于家具，壁纸，天花板，墙面，窗帘，化纤地毯，沙发等 使用范围： 公共场所：幼儿园，学校，宾馆，医院，网吧，电影院，养老院，KTV，酒楼，美容美发院等 办公场所：办公室，电梯，车间，会议室，仓库等 家居场所：客厅，书房，卧室，厨房，卫生间等 注意事项： 1.放置于儿童不易接触的地方 2.本产品含雾化气体，请远离火源，严禁暴晒，重压，撞击 3.严禁封闭空间内施工，施工后充分换气，孕妇及婴幼儿应远离施工场所 4.使用时请均匀喷涂，如有积液，白色乳点等现象，请立即擦拭，一周后可正常清洁，用干，湿布交替清洁即可 5.施工后2小时内请勿触碰，自然干燥后可形成纳米保护膜，48小时内勿使用硬物摩擦，72小时后进入进化稳定期 6.不要在亮光金属，电脑，音响，仪器设备，透明玻璃，消防烟 感器，深色亮光表面进行喷涂 Product Name: SENKE Nanometer Photocatalyst Formaldehyde Sca venger Net Content: 280ML Ingredients: deionized water, formaldehyde sca venger, photocatalyst and plant essence oil, etc. Storage: store it in normal temperature and a void light Directions: Clean and dry the surface to be sprayed and block the part where spray is not needed.. Adjust use amount of the product properly according to space size. Keep ventilation before and after spray. Shake the can lightly before use. The perpendicular distance from nuzzle to the object to be sprayed should be about 25cm. Spray on furniture, wallpaper, ceiling, wall, curtain, chemical fiber carpet and sofa, etc. Useable Range: Public place: kindergartens, schools, hotels, hospitals, internet cafés, cinemas, old people's homes, KTV, restaurants, beauty salons, etc. Office Spaces: offices, elevators, workshops, meeting rooms, warehouses, etc. Household: living rooms, study, bedrooms, kitchens, rest rooms, etc Cautions: 1. Put it at a place out of the reach of children. 2. The product contains atomizing gas. Keep it far away from fire sources. Forbid sunning, pressing and being collided. 3. Forbid construction in confined space. Carry out sufficient ventilation after construction. Pregnant women and babies should stay away from the construction site. 4. Ensure to spray evenly at the time of use. If there is accumulated liquid and white points, etc, please wipe at once. Normal cleaning may be conducted after one week. Use dry and wet cloth to clean alternately. 5. Don’t touch it within 2 hours after construction. It may form nanometer protective film after natural dry. Don’t use hard object to rub within 48 hours. It enters the stabilization period after 72 hours. 6. Don’t spray on bright metals, computers, sounds, instruments and equipment, transparent glass, smoke detectors and dark bright surfaces.