路博润ESTANE ZHF 95AP7 TPU ESTANE? ZHF 阻燃型TPU 化合物是一种非卤（无卤）技术。 主要用于 电线和电缆 护套，但也可用于软管和硬管、注塑以及织物涂料应用。 如需查看其他阻燃等级，请访问 ESTANE? 58000 产品页面，具体为ESTANE? 58244。 高热 ESTANE? TS92AP7 等级是对这一电缆用产品的有利补充。此外， ESTANE? EV系列 NHFR材料解决方案是针对电动汽车充电系统电缆而专门设计的。 Technical Data Sheet Type: ESTANE? ZHF 95AP7 is a 95A aromatic Thermoplastic Polyurethane (TPU) Features: Zero halogen, flame retardant compound with low smoke and high Limiting Oxygen Index Uses: Extrusion – wire and cable jacketing and general extrusion where demanding flame-retardant properties are required. ? Prior to testing samples were conditioned at 23°C for 48 hours. ? Based on extruded sheet (30 mils). ? Listed values are “typical (erage) values” and should / cannot be applied for specification pures. Supply Form and Standard Packaging ? ESTANE? ZHF 95AP7 is supplied in pellet form and packaged in 50 lb bags or 1000 lb boxes. Material Preparation ? Prior to processing, ESTANE? ZHF 95AP7 must be dried at 220°F (104°C) for 2-4 hours. ? It is recommended to dry the material in a desiccant type dryer. Target dew point should be -40°C. ? Depending on the applied processing technique, the maximum moisture level should be 0.02%. Processing Conditions ? ESTANE? ZHF 95AP7 can be processed on any conventional extruder. Physical Properties Value (Metric) Unit Test Method Hardness (5 sec) 93 +/- 3 Shore A ASTM D-2240 Specific Grity 1.40 ASTM D-792 Tensile Strength 3000 (20.7) psi (MPa) ASTM D-412 Ultimate Elongation 320 % ASTM D-412 Tensile Stress at - 100 % Elongation 2200 (15.2) psi (MPa) ASTM D-412 - 300 % Elongation 2800 (19.31) psi (MPa) ASTM D-412 Tear Strength Gres 500 (9.0) lb/in (kg/mm) ASTM D-624 (die C) Trouser 125 (2.27) lb/in (kg/mm) ASTM D-470 Taber Loss (1000 rev) 0.00356 (101) oz (mg) ASTM D-3389 (H-18, 1000g) Tm (by DMA) 413 (212) °F (°C) Lubrizol Advanced Materials Tg (by DMA) 3 (-16) °F (°C) Lubrizol Advanced Material