Note: 1.
Intermittent means the entrance of the maximum pressure; continuous working
pressure means the differential pressure
2. Motor should
not work under the highest pressure and the maximum speed
3. The running
time should not exceed 10% under intermittent working conditions
4. The Maximum
working temperature is 80 °
5. The maximum
allowable back pressure is 10MPa, but the recommended back pressure should not
exceed 5MPa.a leaking pipes is needed
when exceeding
6. one hour
running time under 40% of maximum working pressure is recommended before full
capacity working.
7. Recommending
N68 anti-wear hydraulic oil, viscosity 37-73cSt, cleanliness ISO18/13.