在使用永恒力叉车电瓶时，请严格遵守安装手册内的建议及守则。整体电池组串联电压很高，重量也很沉，因此安装时，对固定蓄电池箱体的起吊线要注意分离，避免接触蓄电池单体极柱短路。永恒力叉车蓄电池每天工作完后，注意检查液体是否足量，正负极柱线是否松动；在充电过程中，记得检查充电电压及充电电流是否符合叉车的充电标准，这样能避免蓄电池在充电造成的过度充电；一般蓄电池充电充电电流为蓄电池组容量的十分之一，如：48V400AH永恒力叉车电瓶，充电电流应为40安以下，充电电压高于48V以上。
At use the abyss of time dint fork car electric cell, please strictly obey to install the suggestion and rules in the manual.The whole battery set establishes electric voltage very high, the weight also really sinks, therefore install, to fix a storage battery box body of rise to mourn line have to notice separation, avoid getting in touch with storage battery list body pole pillar short circuit.After finishing working every day, the abyss of time dint fork car storage batterys attention checks liquid whether the foot measures, plus or minus pole whether pillar line loosens;In the process of refreshing in, remember that the check refreshes electric voltage and refreshes whether the electric current matches refreshing of fork car standard, can avoid like this storage battery being refreshing to result in excessively to refresh;The general storage battery refreshes the electric current as storage battery set capacity pretty much of a, such as:The 48 V400 AH the abyss of time dint fork car electric cell, refreshing the electric current should for less than 40 Annes refresh electric voltage is higher than a 48 V above.