可燃介质管道工程的施工和检验要求。 The
Specification specifies requirements for construction and inspection of
hypertoxic toxic levels are utmost hazard, high hazard, moderate hazard and
negligible hazard and combustible medium piping engineering. 本规范适用于设计压力400
Pa[绝压]~42MPa[表压],设计温度-196℃~850℃的有毒、可燃介质钢制管道工程的施工及验收。 The
Specification is applicable for construction and acceptance of hypertoxic and
combustible medium steel piping engineering with design pressure of 400Pa
[absolute pressure]~42MPa [gage pressure] and design temperature of -196℃~850℃. 本范围不适用于长输管道及城镇公用燃气管道的施工及验收。 The
Specification is not applicable for construction and acceptance of
long-distance pipeline and gas pipeline. 2 规范性引用文件Normative documents quoted 下列文件中的条款通过本规范的引用而成为本规范的条款。凡是注日期的引用文件,其随后所有的修改单不包括堪误的内容或修订版均不适用于本规范,然而,鼓励根据本规范达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版适用于本规范。 Provisions
in following documents are quoted as provisions of the Specification.
Modification excluding corrigendum or revision of dated document is not
applicable for the Specification. It is suggested that all parties who reach an
agreement based upon the Specification can study whether the latest revision of
the dated document can be used. Latest revision of undated document is
applicable for the Specification. GB 4159 金属低温夏比冲击试验方法 Test Methods for Low Temperature Variation
Ratio Impact of Metal GB/T 4334.1~6 不锈钢耐腐蚀试验方法 Test Method for Anticorrosion of Stainless
Steel GB 5777 无缝钢管超声波探伤方法 Methods for Supersonic Inspection of
Seamless Steel Pipe JB 4730 压力容器无损检测 Nondestructive Test of Pressure Container SH 3503-2001 石油化工工程建设交工技术文件规定 Specifications for Technical Document of
Handover of Petrochemical Engineering Construction SH3059-2001 石油化工管道设计器材选用通则 General Rule for Pipeline Design and
Selection in Petrochemical Industry SH 3064 石油化工钢制通用阀门选用、检验及验收 Selection, Inspection and Acceptance of
Common Steel Valve in Petrochemical Industry SH 3505 石油化工施工安全技术规程 Specifications for Safety Technology of
Construction in Petrochemical Industry SH3521 石油化工仪表工程施工技术规程 Technical Specifications for Construction
of Meter Works in Petrochemical Industry SH 3526 石油化工异种钢焊接规程 Specifications for Welding of Special Steel
in Petrochemical Industry 国质检锅[2002]109号 GZJG [2002] No. 109 锅炉压力容器压力管道焊工考试与管理规则 Rules for Examination and Management of
Welder for Welding of Pressure Container and Pipe of Boiler 劳部发[1993]441号LBF [1993] No. 441 锅炉压力容器无损检测人员资格考核规则 Rules for Qualification Test of Operator
for Nondestructive Test of Pressure Container of Boiler 3 总则
General 3.1 有毒、可燃介质管道施工应按设计文件规定进行,修改设计或材料代用,应经设计单位批准。 3.1 Construction of hypertoxic and
combustible medium piping shall be carried out as per specifications in design
document. Modification of design or replacement of material shall be approved
by the design unit. 3.2 管道施工的安全技术和劳动 保护,应按SH 3505的规定执行。在已投入生产的区域内施工时,应按生产区域的特点制定施工安全技术措施。 3.2 Safety technique
and labor protection for piping installation shall be implemented according to
SH 3505. If constru -----------------------主要业务------------------------------------------------ 企业咨询项目 雨正咨询--我们不是全能型的咨询机构,我们只做我们所擅长的,我们致力于把我们所擅长的项目做到最专业,让能够成为我们客户的企业,用最低的成本、最短的时间通过各项许可证项目的评审。 优势项目: 特种设备许可证