厂商 ：广州泓通检测设备有限公司
地址 ：广东 佛山主营产品 ：电线电缆耐燃烧装置 电子产品着火试验设备 灼热丝试验针焰试验仪 水平垂直燃烧试验装置 机械强度试验设备 插头座电线缆检测设备 同轴插座机械试验插头 儿童玩具材料燃烧试验
联系电话 ：13924353969
商品详情描述
高温压力试验装置：HTI-1
High temperature Indentation Device HTI-1
产品概述：本装置符合GB2099.1-2008图41、IEC60884-1-2002标准30.1条款图41、IEC60598- 2-20Clause20.15（也称为绳灯绝缘皮硬度测试架）、EN60811-3-1等标准要求。
刀口厚度：0.7±0.01㎜
负荷：2.5N砝码(或可调)
工位：2位。
Products Information
Indentation Device HTI-1
Product details:Model HTI-1. This apparatus has a rectangular blade (see figure 41a) with an edge 0,7 mm wide, to be used in the case of round pins, or a blade having a round shape (see figure 41b), with a diameter of 6 mm and an edge of 0,7 mm, in other cases.
The specimens are placed in position of the apparatus.
The force applied through the blade is 2,5 N.
The apparatus, with the specimen in position, is maintained for 2 h in a heating cabinet at a temperature of (200 ± 5) °C.
The specimen is then removed from the apparatus and, within 10 s, cooled by immersion in cold water.
The thickness of the insulation remaining at the point of impression is measured and shall not have been reduced by more than 50 % of its original value measured at the start of the test.
No.of Test Station 2
Weight: 2.5N*2(or selectable)
Edge Thickness: 0.7±0.01mm
Conforms to standard: IEC 60884-1 Fig41, VDE0620, BS1363,IEC60598-2-20clause20.15,IEN60811-3-1
High temperature Indentation Device HTI-1
产品概述：本装置符合GB2099.1-2008图41、IEC60884-1-2002标准30.1条款图41、IEC60598- 2-20Clause20.15（也称为绳灯绝缘皮硬度测试架）、EN60811-3-1等标准要求。
刀口厚度：0.7±0.01㎜
负荷：2.5N砝码(或可调)
工位：2位。
Products Information
Indentation Device HTI-1
Product details:Model HTI-1. This apparatus has a rectangular blade (see figure 41a) with an edge 0,7 mm wide, to be used in the case of round pins, or a blade having a round shape (see figure 41b), with a diameter of 6 mm and an edge of 0,7 mm, in other cases.
The specimens are placed in position of the apparatus.
The force applied through the blade is 2,5 N.
The apparatus, with the specimen in position, is maintained for 2 h in a heating cabinet at a temperature of (200 ± 5) °C.
The specimen is then removed from the apparatus and, within 10 s, cooled by immersion in cold water.
The thickness of the insulation remaining at the point of impression is measured and shall not have been reduced by more than 50 % of its original value measured at the start of the test.
No.of Test Station 2
Weight: 2.5N*2(or selectable)
Edge Thickness: 0.7±0.01mm
Conforms to standard: IEC 60884-1 Fig41, VDE0620, BS1363,IEC60598-2-20clause20.15,IEN60811-3-1
相关产品推荐
