HDMI Over Single Coax Extender
OperationManual
Ⅰ:Introduction
The HDMI Over Single Coax Extender sends HDMI signals Over just one 75Ohm Coaxial cable -- up to100Maway. The HDMI Over Single Coax Extender supports HDMI 1.2 and HDMI 1.3 with features such as Deep Color and 1080p.
By using standard and widely available 75Ohm RG-6U cables, the HDMI Over Single Coax Extender makes HDMI signal extensions to be easier than heavy and expensive copper cable and more robust than optical fiber.
Ⅱ:Applications
The HDMI Over Single Coax Extender system consists of a Transmitter and a Receiver. The HDMI source (set-top box, DVD player, or gaming console) connects to the Transmitter box with a HDMI cable. The Receiver box connects to the HDTV display in the same way -- up to100Maway. One 75Ohm RG-6U Coax cable links the Transmitter and Receiver. Power is applied to the Transmitter and Receiver with the included.
Ⅲ:Features
Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75Ohm RG-6U Coax cable.
Audio and video are transmitted digitally over the 75Ohm RG-6U Coax cable with zero signal loss.
SingleLinkRange: 1080p/60, 12 bit color depth.
Compliant with HDMI 1.3;HDCP 1.1 standards;
Supports digital video formats in Deep Color Mode at up to 12bits/color.
Supports PCM L/R audio;
Supports Cascade function in Transmitter and Receiver and it is easy to build a network system by installer.
Lip-Sync Pass Through.
Deep Color Supported (XV Color Supported)
Cascade function in Transmitter and Receiver.
Ⅳ:Package
HDMI Over Single Coax Extender Box-----------------1SETS
5V DC Power Supply Adaptor----------------------------1PCS
Operation Manual--------------------------------------------1PCS
V: Specification
Frequency Bandwidth |
225MHz/link (HDMI 1.3) |
In/Output Support Resolution |
480i, 576i, 720p@50/59.94,60 ;1080i@50/59.94/60 1080p@23.98/24/25/29.97/30/50/59.94/60 |
Power Supply |
5V DC/2A |
ESD Protection Human body model |
±8kV (air-gap discharge) ±4kV (contact discharge) |
COAX Cable Distance |
Full HD up to100M(RG-6U cables) HD up to200M(RG-6U cables) SD up to300M(RG-6U cables ) |
Dimension (mm) |
100(W) x65(D) x 25(H) mm |
Weight (g) |
250g*2PCS |
VI: Operation Controls and Functions
HDMI Over Single Coax Extender Transmitter
Front Panel Rear Panel
(1) DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. The red LED will turn on when the power is on.
(2) Power LED: This red LED will switch on when the device is connected with the power supply.
(3) HDMI In: This slot is to connect with the input source equipment such as DVD or Blue-ray player with connection cable for input video and audio signal transmission.
(4)Coax Out1:Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.
(5)Coax Out2:Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.
HDMI Over Single Coax Extender Receiver
Front Panel Rear Panel
(1) DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet. The red (2) LED will turn on when the power is on.
(3) Power LED: This red LED will switch on when the device is connected with the power supply.
(4) HDMI Out: This slot is where you connect a HDMI / DVI display with a HDMI cable.
(5) Coax IN:Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.
(6) Coax OUT: Connect one 75ohm RG-6U coax cable between the transmitter and the receiver BNC port.
VII: Connection and Installation
|
Connect 2 Connect 3
|
|