厂商 ：上海卓峙自动化设备有限公司
地址 ：上海 上海主营产品 ：编码器 继电器 电源 安全栅 传感器
联系电话 ：13816754864
商品详情描述
- Industrial standard housing ?58 mm
- PROFIBUS interface
- 30 Bit multiturn
- Speed transfer
- Extended scaling functions
- Programmable limit switches
- Commissioning mode
- Recessed hollow shaft
General specifications
Detection type
photoelectric sampling
Functional safety related parameters
MTTFd
70 a
Mission Time (TM)
20 a
L10h
1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load
Diagnostic Coverage (DC)
0 %
Electrical specifications
Operating voltage
10 ... 30 V DC
No-load supply current
max. 230 mA at 10 V DC
max. 100 mA at 24 V DC
Power consumption
max. 2.5 W
Linearity
± 2 LSB at 16 Bit, ± 1 LSB at 13 Bit, ± 0,5 LSB at 12 Bit
Output code
binary code
Code course (counting direction)
programmable,
cw ascending (clockwise rotation, code course ascending)
cw descending (clockwise rotation, code course descending)
Interface
Interface type
PROFIBUS
Resolution
Single turn
up to 16 Bit
Multiturn
14 Bit
Overall resolution
up to 30 Bit
Transfer rate
0.0096 ... 12 MBit/s
Standard conformity
PNO profile 3.062, RS 485
Connection
Terminal compartment
in removable housing cover
Standard conformity
Protection degree
DIN EN 60529, IP65
IP66 (with shaft seal)
Climatic testing
DIN EN 60068-2-30 , no moisture condensation
Emitted interference
EN 61000-6-4:2007
Noise immunity
EN 61000-6-2:2005
Shock resistance
DIN EN 60068-2-27, 100 g, 6 ms
Vibration resistance
DIN EN 60068-2-6, 20 g, 10 ... 2000 Hz
Approvals and certificates
UL approval
cULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature
-40 ... 85 °C (-40 ... 185 °F)
Storage temperature
-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Material
Combination 1
housing: powder coated aluminum
flange: aluminum
shaft: stainless steel
Combination 2 (Inox)
housing: stainless steel
flange: stainless steel
shaft: stainless steel
Mass
approx. 600 g (combination 1)
approx. 1200 g (combination 2)
Rotational speed
max. 12000 min -1
Moment of inertia
30 gcm2
Starting torque
≤ 3 Ncm (version without shaft seal)
Tightening torque, fastening screws
max. 1.8 Nm
Shaft load
Angle offset
± 0.9 °
Axial offset
static: ± 0.3 mm, dynamic: ± 0.1 mm
Radial offset
static: ± 0.5 mm, dynamic: ± 0.2 mm
相关产品推荐
