恒温恒湿绝缘材料工频电压击穿强度试验仪

 The insulation tester material power frequency voltage breakdown strength

DDJ-30KV

Model: DDJ-30KV

恒温恒湿绝缘材料工频电压击穿强度试验仪软件功能:

The software function:

01、软件平台：WINDOWS窗口操作平台，界面直观，便于操作

01, the software platform: WINDOWS windows operating platform, intuitive interface, easy operation

02、曲线显示：在实验过程中可以动态显示试验曲线

02, curve display: during the experiment can dynamically display the test curve

03、数据导出：可以对试验结果导入EXCEL表格

03, export data: the results of test can be imported into EXCEL table

04、实验报告：可以人为设置报告名称，并对实验报告进行打印

04, the experiment report: can be artificially set report name, ａnd print the test report

05、试验方式：可以根据需求对直流试验和交流试验进行灵活选择

05, test mode: can flexibly ｓelect the DC test ａnd AC test according to the demand of

恒温恒湿绝缘材料工频电压击穿强度试验仪满足标准：

30KV import allocation dielectric strength tester meets the standard:

GB/T 1408-2006 绝缘材料电气强度试验方法

GB/T 1408-2006 test methods for electrical strength of insulating materials

GB/T1695-2005 硫化橡胶工频电压击穿强度和耐电压强度试验

GB/T1695-2005 vulcanized rubber power frequency voltage breakdown strength ａnd voltage withstand strength test

GB/T3333 电缆纸工频电压击穿试验方法

GB/T3333 cable paper power frequency voltage breakdown test method

HG/T 3330绝缘漆漆膜击穿强度测定法

HG/T 3330 insulating paint breakdown strength determination

GB12656 电容器纸工频电压击穿试验方法

GB12656 capacitor paper power frequency voltage breakdown test method

ASTM D149 固体电绝缘材料在工业电源频率下的介电击穿电压和介电强度的试验方法.

Test method for materials at commercial power frequencies the dielectric breakdown voltage ａnd dielectric strength of ASTM D149 solid electrical insulation.

绝缘材料工频电压击穿强度试验仪

30KV import allocation dielectric strength test machine safety protection:

本仪器具有比较完善的安全防护措施：

The instrument has the advantages of safety protection measures are perfect:

本仪器具有多重防护措施，保证操作人员的人身安全

This instrument has multiple protective measures, to ensure the personal safety of operators

1、门限位保护：不关门，即使通电点实验开始，设备无任何反应，软件会有:安全门未关闭提示。

1, limit protection: not closed, even if the electricity experiment, without any reaction equipment, software will be: security door is not closed tips.

2、电压归零保护：如果在实验过程中，突然断电，下次开机后，会自动回到零位，保证初始电压为在零位

2, voltage zero protection: if a sudden power failure in the experimental process,, the next boot, will automatically return to zero, guarantee the initial voltage at zero

3、终止电压保护：可以通过软件设定终止电压，保证在升压过程中如果出现异常升到指定的电压后，自动终止并归零

3, the termination voltage protection: can terminate the voltage through the software setting, ensure the boosting process if the abnormal ascending to the specified voltage, the automatic termination ａnd return to zero

4、高压机械限位：如果软件系统失去控制，电压继续往上升，到高压限位后自动归零

4, high mechanical limit: if lost control software system, voltage to continue to rise, to the high-pressure limit after the automatic zero

5、如果在击穿后未判停，通过过流保护器采集数据保证电压自动归零

5, if not to stop in after the breakdown, the overcurrent protection device data acquisition to ensure that the voltage auto zero

6、有高压指示灯，通过观察指示灯的状态来判断实在升压还是在零位

6, there is high pressure lamp, light by observing the state to determine really boost or at zero

7、如果长时间做实验，为保证设备的良好运行，设备留有变压器排气口，保证变压器的良好运行，增长使用寿命

7, if a long time to do the experiment, in order to ensure a good operation of equipment, equipment for transformer outlet, to guarantee the good operation of transformer, increase the service life

8、如果在实验中，试样有异味或者出现燃烧和冒烟现象，可以通过排风系统进行排除。

8, if in the experiment, the sample smell or burning ａnd smoking phenomenon, can be ruled out through the ventilation system.

9、独立接地保护

9, independent earthing protection

10、短路保护

10, short circuit protection

11、软件误操作保护

11, software protection misoperation

12、漏电保护

12, leakage protection

13、实验结束放电保护

13, the over discharge protection

技术指标：

The technical requirements:

恒温恒湿绝缘材料工频电压击穿强度试验仪功能及适用范围

 import allocation dielectric strength test machine function ａnd applicable scope

主要适用于固体绝缘材料（如：塑料、橡胶、层压材料、薄膜、树脂、云母、陶瓷、玻璃、绝缘漆等绝缘材料及绝缘件）在工频电压或直流电压下击穿强度和耐电压的测试。

Mainly applicable to solid insulation materials （such as: plastic, rubber, lamination material, film, resin, mica, ceramic, glass, insulating paint ａnd other insulation materials ａnd parts） in the frequency of the voltage or DC voltage breakdown strength ａnd voltage withstand test.

本仪器由电脑控制，是我公司自主研发的全新第三代介电击穿检测仪器，本仪器电子控制系统是通过西门子PLC控制，数据采集方式通过光电隔离，有效解决试验过程中的抗干扰问题，软件操作使用方便，能够实时显示动态曲线，同时升压速率无级可调，可以根据自己的需要进行升压速率调节，调节范围在10V-5000V/S，处于国内领先地位（国内唯一能达到此功能的厂家），使升压速率真正做到匀速、准确，并能够准确测出漏电电流的数据。可实时绘制试验曲线，显示试验数据，判断准确，并可保存，分析，打印试验数据。

The instrument is controlled by computer, is my company developed a new third generation dielectric breakdown testing instrument, the instrument of electronic control system is controlled by Siemens PLC, data acquisition through a photoelectric isolation, effectively solve the problem of interference in the process of software test, convenient operation ａnd use, to show the real-time dynamic curve, at the same time, the rate of pressure rise stepless adjustable, can according to their own needs to boost rate adjustment, adjustment in the range of 10V-5000V/S, in the domestic leading position （the only domestic manufacturers can achieve this function）, so that the pressure rate truly uniform, accurate, ａnd can accurately measure the leakage current data. May the real-time rendering curves, test data show that, to judge accurately, ａnd can save, print the test data analysis.

本系统能够自动判别试样击穿并采集击穿电压数据及泄露电流，同时能够在击穿的瞬间电压迅速降低自动归零。软件系统操作方便，性能稳定，安全可靠。

The system can automatically determine the sample breakdown ａnd breakdown voltage ａnd leakage current data acquisition, ａnd can rapidly reduce the auto zero in instantaneous voltage breakdown. The software system is easy to operate, stable performance, safe ａnd reliable.

恒温恒湿绝缘材料工频电压击穿强度试验仪试验方式

1、绝缘试样空气中试验       2、绝缘试样浸油中试验

试验界面：

1、试验主界面截图                2、参数设置                 3、试验报告打印参数设置   

设备标准配置

-配备专用测试电极-

部分电极截图

绝缘材料工频电压击穿强度试验仪主要配置