全自动电缆桥架成型设备

Cable tray roll forming machine

一、生产工艺流程

  Technical process

    开卷放料——校平——冲孔/切断——输料台——成型——出料

Uncoiler –Leveling unit – Punching machine (punching and cutting) – Automatic convey table – Forming machine – Collection table

二、设备主要技术参数

Main techiincal parameter

规格尺寸：宽100-600 mm，高50-200 mm，

Dimension: width 100-600mm, height 50-200mm

材料厚度：0.8-2.0 mm

Material thickness:0.8-2.0mm

用料材质：冷轧、镀锌带钢、Q235

Material: cold roll steel, galvanization steel

   出料速度：4-6米/分钟

Production speed: 4-6m/min

   装机总容量：约30KW（不含冲床）

   Total power: about 30KW, not include punching machine

  占地面积：40*3.5 m

  Area: 40 x 3.5m

产品说明：全自动生产线采用双侧悬臂式结构，冲床完成桥架底部环形筋或不同孔型的冲压和切断。由输料台将单张的材料送入成型主机。通过电气控制，自动移动调节生产不同宽度、高度桥架产品。

Product description: automatic cable tray roll forming machine adopt double cantilever type struction, and adjusting different sizes of cable tray by automatic moving system and electric control system. Punching machine punches strengthening ribs and holds on the bottom, and next step，Convey table transport material sheet run into forming machine after cutting unit.