机器主要特点 


a)主桥平程经过上下，多层辊保护，形成多层结构，精度高，稳定性强，所有辊简上下前后经过精确计算设计，使数据微秒变化，最终达到高精度矫平结果，使客户省心满意。


Mult-laver rollers structure: There are both backup roller column(support assistant roller column) arranged upper and lowerleveling roller set Moreover, it had been strictly designed of roller distance between each other,leveling rollers bears pressure in balance. So the equipment is advanced in high stability,reliable and precious leveling performance.


b) 矫平辊采用进口轴承钢经过特殊工艺制成，钢性好，稳定性强，辊简表面研磨后镀硬铬再精磨，辊简硬度为HRC58±2%。。表面硬铬展。00.05mm:


All leveling rollers adopt exported high quality bearing steel,finished quenching and tempering, precious machining, hard chrome plating. grinding etc. Surface hardness comes HRC 58+ 2°(chrome layer thickness0.05mm)

c)所有的齿轮材质为:20CrMnTi，经过锻打，回火，渗碳，精磨等加工，精度达到IT6级。


All gears adopt material of 20CrMnTi,finished forgingtempering.surface carburization,precious grindingetc.coming to grade T6.


d)主要轴承采用带自润滑的原装日本进口轴承，既能自润滑又密封性好，所以不需要额外加润滑装置。


Main bearings are Shielded and sealed NSK bearing made in JAPAN,it can well reserve itself stocked lubrication oil and prevent dust enters, so it doesn’t need to addlubrication oil on bearings.


e)整平辊间隙调节方式:手摇调节和电动调节。